We use HDG cablofil with tray cover. Chris Mason Comet Systems Anguilla (264) 235-5670 St. Kitts (869) 662-5670 skype netconcepts
NABCEP Certified Solar PV Installer(tm) Renewable Energy Systems professional Generac Generators Factory technician On Jan 28, 2014 4:21 PM, "Davis Terrell" <da...@mckernongroup.com> wrote: > Wrenches, > > > > Anyone have any experiences with running #10 PV-Wire in a cable tray on a > sloped (albeit slight) roof? I have to collect a number of home runs along > a 180' stretch of roof and would prefer not to transition on the roof or > penetrate the roof. I searched the archives and found a few mentions, but > not much info. Any problems with inspections? Also, what are thoughts > about fabricating an Aluminum "shroud" of sorts to keep UV off the wires? > Thanks in advance, > > > > > > Davis Terrell > > Project Manager > > Green Earth Energy > > da...@mckernongroup.com > > office: (802) 247-1200 > > mobile: (802) 989-1661 > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
