We have, if there are two separate mains each 200 amps the meter socket is 400 amps just don't overload one side On Jan 23, 2014 11:31 AM, "John Powell" <a...@solforce.com> wrote:
> Has anyone tried to connect one 40 amp inverter output circuit to each of > the two breakers on a 2 x 200AMP single meter main panel in California? > This would yield 80 amps of solar feed into the panel and the meter using > two discreet circuits. It would stay under the 120% rule for each 200 amp > breaker/buss and the 400 amp buss that serviced the line side of the two > 200 AMP breakers. > > Kosher? > > > Abe > -- > J. Abraham Powell > Phone: (805) 695-0015 > > > > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
