Friends:
We replaced a set of 24 IBE batteries recently. The original set had all batteries with captive cables (and one flag) except one, which had two flags. This made it easy to connect the leads from the BOS: there was a flag on the positive and negative ends. The new set had all batteries with cables. Is there a standard for this? Also, the flags had all 5/16 holes but when we untapped the lugs on the cables, the holes were ¼. We are very used to using 5/16 SS bolts and that is what we had in stock. I am not comfortable using ¼ battery bolts. Is there a standard for battery bolts? Thanks in advance. William cid:679355323@23072013-1054 17395 Oak Rd. Atascadero, CA 93422 <http://www.millersolar.com/> www.millersolar.com 805-438-5600 voice
<<image003.jpg>>
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
