Hi Kirpal, All Square D safety switches are UL tested in the Vertical position ONLY, so if someone is trying to install a switch in any other position other than vertical, that will be between them and the inspector. Hope this helps. Eric _____________________________________________________________________________________
Eric Bentsen | Schneider Electric | Solar Business | UNITED STATES | Technical Support Representative Phone: +(650) 351-8237 ext. 001# | Email: eric.bent...@schneider-electric.com | Site: www.schneider-electric.com/solar | Address: 250 South Vasco Rd., Livermore, CA 94551 *** Please consider the environment before printing this e-mail From: Kirpal Khalsa <solarwo...@gmail.com> To: RE-wrenches <re-wrenches@lists.re-wrenches.org> Date: 11/07/2013 01:42 PM Subject: [RE-wrenches] Square D Disconnects mounted on the slope of the roof. Sent by: re-wrenches-boun...@lists.re-wrenches.org Hi Folks!!! Anyone aware of minimum slope requirements for Square D 321RB disconnects....Can they be mounted on rails parallel to the slope of the roof like Outback and Midnite solar combiner boxes(down to a 3/12 pitch) I can't seem to find any notes stating the limitations in manufacturer documentation...... They are NEMA 3 of course.... Thanks in advance for any direction you can provide.... Sunny Regards, Kirpal Khalsa NABCEP Certified PV Installation Professional Renewable Energy Systems www.oregonsolarworks.com 541-218-0201 m 541-592-3958 o ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. ______________________________________________________________________ _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
<<image/jpeg>>
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
