Hi Matt, I have a very similar (maybe identical) problem with a Whisper 200 that I've been trying to solve for several weeks. When you say that it's not performing what exactly do you mean?
My problem surfaced following a lightning storm and everything pointed to the controller. I replaced the controller with a Clipper & Classic. The turbine still just spins slowly as if the brake switch was on and only ramps up when leads are removed to the controller. I've double checked the wiring, dropped the turbine and checked the brushes, stator, connections etc. everything checks out. The batteries are weak but still showing acceptable voltage above 48v. I'm also at a loss. I've had a couple of discussions with the guys at renewable energy supplies and they seem to be knowledgeable but I still can't sort it out. Anyway maybe give these guys a call: http://renewableenergysupplies.net/index.html Will be interested to hear how you make out. Ron Young On 2013-10-14, at 5:38 PM, Matt Sherald <m...@getpimby.com> wrote: > I've got a Whisper that's not performing and I'm putting this out to the > group in hopes that someone has had a similiar dilemma. > > My line to line voltage measurements are the same between the three phases. > However, my line to ground measurements are consistent across only two of the > phase-ground combinations. The third phase appears to be shorting to ground. > > I had the tower down and took the machine off to check the split bolt > connections at the top of the tower for wear/rubbing. The down tower wiring > checks out. I opened the wire access on the machine to double check wire > insulation and the wire nut connections. I unbolted the slip rings and > checked for any sign of a smoking gun there. Nothing jumped out at me during > the inspection and I'm curious if it might be in the spinner assembly. > > With no tech support to turn to I am hoping that someone in the Wrench > community might have had a similiar conundrum at one time. I'd appreciate > hearing from you if you have. > > Many thanks in advance. > > > > Matt Sherald > PIMBY: Power In My BackYard > NABCEP Certified Solar PV Installer® > m...@getpimby.com > (304) 704-5943 > > www.getpimby.blogspot.com > www.getpimby.com > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Change email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
