William,
We get it with two pairs of color coded #8 copper and a #10 ground. Off
the shelf you can get #14, #12, #10, #8, and #6 and on up to 500 MCM.
The 14-10 go up to 10 conductors and the 8 and 6 go up to 4 conductors.
Here's a URL, not the cheapest place, but to give you an idea:
http://www.onestopbuy.com/wire-cable/Product-Price-Code-TK-40629.asp
Graybar had the best price for us.
You can also get it custom in big quantities from some manufacturers.
If you support it every 18" or so it stays straight. The end connectors
are a bit of a PITA to assemble. The key is to cut the end of the armor
cleanly and as directed and then disassemble the connector and put it on
piece by piece. Takes a couple of minutes.
Hilton
--
Hilton Dier III
Renewable Energy Design
Partner, Solar Gain LLC
453 East Hill Rd.
Middlesex, VT 05602
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
