We just advise to shut off the boiler when there is no heating loads. 
Simple!

Jeremy
All Solar

Sent by Jeremy's iPhone. Sorry for typos and shorthand!

> On Sep 24, 2013, at 4:19 PM, "Kirk Herander" <k...@vtsolar.com> wrote:
> 
> Hi,
>  
> Every summer I get a few calls from annoyed hot water customers who can’t 
> stand hearing their boiler fire merely to keep the indirect tank up to 
> setpoint temperature, when of course the solar preheat tank is at 160 degrees 
> or better at mid-day. So what’s the best way to transfer heat, in essence 
> temporarily putting the tanks in parallel, from the solar tank to indirect? I 
> can think of a few possibilities using a circulator and temperature 
> controller, and a additional connection between the tanks, such as the tank 
> drains plumbed together as a return line, but where is the best place to 
> locate the circulator in a standard preheat arrangement (i.e. hot output of 
> solar preheat plumbed to cold input of indirect tank)?
>  
> Kirk Herander
> VT Solar, LLC
> dba Vermont Solar Engineering
> NABCEPTM Certified Inaugural Certificant
> NYSERDA-eligible Installer
> VT RE Incentive Program Partner
> 802.863.1202
>  
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches@lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: 
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to