Hi Jesse, With my XW4024, I have (2) GFCI recepticles within 2 ft of the PDP. I am required to set search to 90W before it enters search mode, but if I cut the breakers that feed the GFCIs, I can set search to min value (25W) and it will remain in search mode. Most folks do not use search because certain loads require continuous AC, i.e. the clock on your microwave, or a fridge,etc. The power draw in search is 8W, and no load draw when inverting is approx 25W. Hope that helps, Eric _____________________________________________________________________________________
Eric Bentsen | Schneider Electric | Solar Business | UNITED STATES | Technical Support Representative Phone: +(650) 351-8237 ext. 001# | Email: eric.bent...@schneider-electric.com | Site: www.schneider-electric.com/solar | Address: 250 South Vasco Rd., Livermore, CA 94551 *** Please consider the environment before printing this e-mail From: Jesse Dahl <dahlso...@gmail.com> To: Wrenches <RE-wrenches@lists.re-wrenches.org> Date: 09/08/2013 03:39 PM Subject: [RE-wrenches] Search mode Sent by: re-wrenches-boun...@lists.re-wrenches.org Hello, A friend of mine in the woods just put in a new xantrax inverter and is having a search mode problem. They can't get 25W search mode to work and are stuck with using the 50W setting. So they've had to put a few incandescents in to make this setting work. His calls to tech support have been less then helpful. Advice I can pass on? Thanks as always! Jesse Sent from my iPhone _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. ______________________________________________________________________
<<image/jpeg>>
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
