My experience is that a 5/16" bolt will always work but a 3/8" bolt will be tight. Easy enough to ream out to 3/8". It's only soft lead...
On Sep 1, 2013, at 7:20 PM, RE Ellison wrote: Most of the ones I have run across are 3/8’s Bob From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Greg Egan Sent: Sunday, September 01, 2013 9:55 PM To: re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] size of Surrette AGM S-460 Stud Terminals? Wrenches, I can find a pdf on Surrette's site and many other sites with the specs on the S6-460 AGM but the part showing the size of the terminals is unreadable. It's either 5/16th or 3/8" or some metric equivalent. If anyone knows exactly what it is - I'd like to know. I honestly don't think the info is available unless it's in some restricted area of the Surrette site. Thanks! Greg Egan Nabcep PV Installer Certified Journeyman Electrician Remote Power Inc. -- _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
