Marco,
You might try http://pv-cables.com/ my contact there is Bryan. They sell all kinds of PV wire, connectors, etc for good prices. Do you have 1000 V TL inverters or just 600 V? If you are using 1000 V the whole wiring game changes quite a bit. Best, August Luminalt *From:* re-wrenches-boun...@lists.re-wrenches.org [mailto: re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *Marco Mangelsdorf *Sent:* Friday, August 30, 2013 2:54 PM *To:* 'RE-wrenches' *Subject:* Re: [RE-wrenches] double-insulated PV wire Note that this also assumes that the conductor whips from the modules ARE ALSO double insulated if they’re to be used with TL inverters. Some mods have ‘em, some do not. *From:* re-wrenches-boun...@lists.re-wrenches.org [ mailto:re-wrenches-boun...@lists.re-wrenches.org<re-wrenches-boun...@lists.re-wrenches.org>] *On Behalf Of *William Miller *Sent:* Friday, August 30, 2013 11:52 AM *To:* 'RE-wrenches' *Subject:* Re: [RE-wrenches] double-insulated PV wire Marco: Good point. If one can position transition boxes close enough to the modules, you can use only the leads from the modules, avoiding the need to buy any PV wire. It is surprisingly easy to do. See: http://www.millersolar.com/MillerSolar/practices/PV_wiring/PV_Cable_wiring/_PV_Cable_Wiring.html WM double-insulated wire has to be used from the module series string to the first enclosure and enclosed raceway where the transition to standard THHN/THWN wire can be made. marco
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
