Nathan: You can find 1000 V rated PV wire from a number of sources. A simple google search for "UL4703 PV Wire" will yield several choices. PV wire is approved for use in conduit but you will need to calculate the conduit fill factors manually since the outside diameter is larger than the "standard sized wires"
Conduit is not an issue @ 1000V but switchgear, combiners and fuses are a bit harder to find (but not impossible). Not sure of the specifics of the system so it is hard to make detailed recommendations. Best Regards, John Berdner General Manager, North America SolarEdge Technologies, Inc. 3347 Gateway Boulevard, Fremont CA 94538 USA (*Please note of our new address.) T: 510.498.3200, X 747 M: 530.277.4894 From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Nathan Stumpff Sent: Friday, March 29, 2013 12:09 PM To: re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] 1000 Vdc Wrenches, This is an offshoot in a way to the Cable Tray discussion, but until there are Brits running my permit office... I am considering pitching a 1,000 Vdc system to my AHJ, and it seems like the solar components (modules, inverters, combiners, array wire) are the easy part in a lot of ways. We use Cerro XHHW-2 for basically all of our wiring outside of an array, and it is clearly marked 600 V. Does anyone have a good resource for wire, conduit, fittings, junction boxes, etc. that carries a 1000 Vdc rating? Does anyone know of a 1,000 Vdc rated PV Wire that can be run in conduit in a building? Any info appreciated, thanks, -Nathan -- Nathan J. Stumpff NABCEP Certified PV Installer #091209-175 NABCEP Certified Solar Heating Installer #032412-14 Project Manager | Arctic Sun, LLC nat...@arcticsun-llc.com <mailto:nat...@arcticsun-llc.com> | (907) 457-1297 www.reina-llc.com<http://www.reina-llc.com> | www.arcticsun-llc.com<http://www.arcticsun-llc.com/> [cid:image001.png@01CE2C7B.AB3A0930]<http://www.facebook.com/ArcticSunLLC> CONFIDENTIALITY NOTICE: This e-mail and its attachments are intended only for the use of the individual or entity who is the intended recipient and may contain information that is privileged, confidential and exempt from disclosure or any type of use under applicable law. If the reader of this e-mail is not the intended recipient, or the employee, agent, or representative responsible for delivering the e-mail to the intended recipient, you are hereby notified that any dissemination, distribution, copying, or other use of this e-mail is strictly prohibited. If you have received this e-mail in error, please reply immediately to the sender. P Please think of the environment before printing this email
<<inline: image001.png>>
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
