Alan:

Use a ferrule on the inverter end of the wire.
Makes fine strand cable suitable for "normal lugs"

Burndy has some that they say are for fine strand (Class K) cable.
http://www.burndy.com/products/new-products/bare-ferrules.aspx

They look exactly the same as the cheaper un-insulated ferrules from ferrules 
direct.
http://www.ferrulesdirect.com/

Best Regards,

John Berdner
General Manager, North America

SolarEdge Technologies, Inc.
3347 Gateway Boulevard, Fremont CA 94538 USA  (*Please note of our new address.)
T: 510.498.3200, X 747
M: 530.277.4894

From: re-wrenches-boun...@lists.re-wrenches.org 
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Allan Sindelar
Sent: Friday, March 15, 2013 3:58 PM
To: RE-wrenches
Subject: [RE-wrenches] Question re fine stranded cable with Sunny Island 
inverters

Wrenches,
A small issue, drawing on the collective wisdom here:

For an upcoming quad-stack installation of Sunny Island inverters, I foolishly 
ordered some fine stranded copper 1/0 Cobra X-Flex Cable because of its 
flexibility. In this situation, because of NEC ampacity requirements on our 
total DC cabling (this system also has a single Radian for some dedicated 
loads) we are only running 125 amp DC breakers on each SI inverter.
Our issue is that the SI installation manual specifically notes not to use fine 
stranded cable into the terminal lugs. This was news to me. We can purchase 1/0 
Ilsco or Panduit copper pigtail adapters to make the connection into the 
terminals of the inverters, but they are $10 to $14 each, and we need eight of 
them.
Is using doubled up #4 or #2 the only solution? Are there any other suggestions 
that will allow us to use the 1/0 X-Flex?
Thank you,
Allan
-
Allan Sindelar
al...@positiveenergysolar.com<mailto:al...@positiveenergysolar.com>
NABCEP Certified Photovoltaic Installer
NABCEP Certified Technical Sales Professional
New Mexico EE98J Journeyman Electrician
Founder and Chief Technology Officer
Positive Energy, Inc.
3209 Richards Lane (note new address)
Santa Fe, New Mexico 87507
505 424-1112
www.positiveenergysolar.com<http://www.positiveenergysolar.com/>






CONFIDENTIALITY NOTICE: This e-mail and its attachments are intended only for 
the use of the individual or entity who is the intended recipient and may 
contain information that is privileged, confidential and exempt from disclosure 
or any type of use under applicable law. If the reader of this e-mail is not 
the intended recipient, or the employee, agent, or representative responsible 
for delivering the e-mail to the intended recipient, you are hereby notified 
that any dissemination, distribution, copying, or other use of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please reply 
immediately to the sender.
P  Please think of the environment before printing this email
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to