I completely agree, Roy. In the absence of labeling or a manufacturer's spec sheet indicating a higher rating on the bus bars, we've got to go by the disconnect or panel rating. But, every now and then you get lucky and I didn't want to overlook an obvious (or easy) solution for Garrison.
Ever the hopeful optimist (after all, I work in the wind energy field)... Ross - > Message: 1 > Date: Fri, 01 Mar 2013 12:38:24 -0500 > From: Roy Butler <r...@four-winds-energy.com> > To: RE-wrenches <re-wrenches@lists.re-wrenches.org> > Subject: Re: [RE-wrenches] Conductor Sizing for Supply Side Connection > Message-ID: <5130e790.50...@four-winds-energy.com> > Content-Type: text/plain; charset="us-ascii" > > An HTML attachment was scrubbed... > URL: < > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130301/1009c15c/attachment.html > > > > ------------------------------ > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
