Kirk, A few years ago Jeff Randal at DPW made us a nice cabinet for a single Fronius inverter. It was not insulated. Maybe they could customize a unit to your specs?
Dave -----Original Message----- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Kirk Sent: Friday, February 08, 2013 1:38 PM To: RE-wrenches Subject: [RE-wrenches] Insulated cabinet source Hello, I'm looking to source insulated cabinets, relatively large to house -3- Fronius 5 Kw inverters. They only have a low operating temp spec of -4F. I plan to supply min heat using a small resistive element. Long story, but inverters have to be mounted at the array and I must use Fronius. This is part of an OEM module evaluation in cold climates. Permitting does not allow building a shed. Thanks. Kirk Herander VSE _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
