Hi gang. Home Power featured a simple, DIY module lift in Issue #143. Contact me off list if you do not have access to the article and are interested.

Eric Youngren wrote at 12:51 PM 2/7/2013:
 
I agree that its impossible to maintain 3 points of contact on a ladder while sliding a module up above you.   I've done it many times but I agree that its probably not kosher according to OSHA.  

This reminds me of a product idea I had with a friend who does canvas sewing for boat covers and such.   

How about this?:    A heavy-duty canvas bag for carrying PV modules, with backpack straps and D-rings in the corners?   With a module pack bag, installers could climb a ladder with both hands while the module is securely on their back,  Or it could also provide an easy way to tie on a rope and haul them up, or secure them on a sloped roof before installation.    How many installers would be interested in something like that??      How much would you be willing to pay for it?   

Eric
Solar Nexus International



On Thu, Feb 7, 2013 at 12:03 PM, Garrison Riegel < [email protected]> wrote:

It is not possible to maintain three points of contact at all times while carrying a module up a ladder.  It is my understanding that if three-point contact is not possible at all times, then a personal fall arrest system is required.  This is not called out specifically in Subpart X, but if an injury or fatality were to result from carrying modules up a ladder I think it would be difficult to avoid getting fined or sued.

 

We use a power ladder whenever possible.  It takes a while to set up, but is OSHA compliant, can lift multiple modules at once, and saves wear and tear on the crew. The only real issue is upfront cost, but this is cheap when compared to the long term cost of a workman’s comp claim.

 

My 2¢

 

Garrison

 

Solar Service Inc

847-677-0950

 

 

From: [email protected] [ mailto:[email protected]] On Behalf Of August Goers
Sent: Thursday, February 07, 2013 12:44 PM
To: RE-wrenches
Subject: [RE-wrenches] getting PV modules up to the roof

 

Hi Wrenches,

 

I imagine that all of us working in rooftop PV have put some good hard thought on the best way to get the modules up to the roof. There are various lifts on the market, you can hoist them with ropes manually, or walk them up a ladder (sling them over your back). I find that the majority of our competition in the Bay Area walks panels up the ladder for residential projects. What is your feeling about OSHA compliance of doing this?

 

Best,

 

 

August

415.559.1525

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org



_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to