Jay:

There are several lithium chemistries out there.
The exact voltages will depend on the chemistry but in general Lithium is 
around 3 V/cell.
I am liking LiFePO4 (China Aviation Lithium Battery - CALB) these days and they 
need:

Vnom = 3.2 V/Cell
Vcharge_max = 3.6 V/Cell (but this will require active battery management on a 
per cell basis).
Vcharge_max_good_idea = 3.5 V/Cell

Lithium is sensitive to overcharge and very bad things can happen if they are 
overcharged.
Active battery management and cell balancing is likely needed if they are to be 
stable over the long term.

Best Regards,

John Berdner
General Manager, North America



SolarEdge Technologies, Inc.
3347 Gateway Boulevard, Fremont CA 94538 USA  (*Please note of our new address.)
T: 510.498.3200, X 747
M: 530.277.4894


-----Original Message-----
From: re-wrenches-boun...@lists.re-wrenches.org 
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz
Sent: Thursday, January 24, 2013 7:41 PM
To: RE-wrenches
Subject: [RE-wrenches] lithium batteries

HI All,

Is there a rough voltage range ( high/low nominal) for the lithium family of 
batteries?

I'm curious if our current range of inverters can work with these batteries, at 
least on the load side, probably not on the charging side.

thanks,

jay

peltz power
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


CONFIDENTIALITY NOTICE: This e-mail and its attachments are intended only for 
the use of the individual or entity who is the intended recipient and may 
contain information that is privileged, confidential and exempt from disclosure 
or any type of use under applicable law. If the reader of this e-mail is not 
the intended recipient, or the employee, agent, or representative responsible 
for delivering the e-mail to the intended recipient, you are hereby notified 
that any dissemination, distribution, copying, or other use of this e-mail is 
strictly prohibited. If you have received this e-mail in error, please reply 
immediately to the sender.
P Please think of the environment before printing this email
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to