Jesse -
We order at least 1 extra drop for each of our Enphase installs now, just to
make things easier. The engage splices are pretty slick but aren't cheap. Those
are two options (except that you already have the material...so really only
one.) Pulling the slack out of the engage cable works but is not a best
practice if it kinks the cable, obviously. I'd go with the engage splices.
E.Stikes
----- Original Message -----
From: Jesse Dahl
To: RE-wrenches
Sent: Wednesday, January 02, 2013 8:57 PM
Subject: Re: [RE-wrenches] center feeding Enphase
I find info about the AC soladeck in my distributors catalog, but I don't
find any information about it on Soladeck's website.
On Wed, Jan 2, 2013 at 7:18 PM, Jesse Dahl <dahlso...@gmail.com> wrote:
Hello,
I am in the process of installing a Enphase system that requires center
feeding the individual 15 modules circuits. I am wondering about wiring the
J-Box. I need to cut all of the boxes into the center of the runs of Engauge
cable and maintain the 6" of free conductor. To do this, I will need to pull
the trunk cable towards the J-Box. There are a few spots where doing this may
pull the inverter connection points to far from the inverter. It looks like
like the spots where this will be a problem is where the circuit of modules is
made up of modules from different North-South rows of racking. I took some
rough measurements at the end of the day, but haven't really laid the cable out
to check if it will really be problem.
I'm sure this is common, and easily fixed, but a conformation from another
installer would surely be welcome.
Thanks,
Jesse
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
