Reviewing the posts, I agree that wouldn't help.

At 06:16 PM 12/9/2012, you wrote:
Then you have to find a 600V DC rated contactor. If you are going to use a contactor, which the original poster said he couldn't do, why not use the 240V AC rated, costs about $129 for a 30A contactor.


On Sun, Dec 9, 2012 at 6:10 PM, Drake <<mailto:drake.chamber...@redwoodalliance.org>drake.chamber...@redwoodalliance.org> wrote:
Why not disconnect the DC into the inverter with a Tyco relay?  No DC, no AC.




At 10:32 AM 12/5/2012, you wrote:
Hi All,

I am looking for options for controlling a disconnecting relay for a
grid-tied inverter.  It is a PVI5000 so 30 amp 240vAC.  I need to
disconnect it when the backup generator gets kicked on by the Automatic
Transfer Switch when the grid goes down.  The array is on a garage that is
several hundred feet from the house and service entrance and ATS and
digging in a control wire for that distance won't work.  So I need a way
to sense that the generator is putting out power and then control a
contactor which would disconnect the inverter from the subpanel.  I've
looked for wireless and powerline control options but I can't seem to put
together the pieces.

Any ideas of the most cost effective and reliable approach?

Thanks,
Howie
--
Howie Michaelson
NABCEP Certified Solar PV Installer™

Catamount Solar, LLC
Renewable Energy Systems Sales and Service
VT Solar Electric & Hot Water Incentive Partner
<http://www.CatamountSolar.com>http://www.CatamountSolar.com
<tel:802-272-0004>802-272-0004





_______________________________________________
List sponsored by Home Power magazine

List Address: <mailto:RE-wrenches@lists.re-wrenches.org>RE-wrenches@lists.re-wrenches.org

Options & settings:
<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
<http://www.re-wrenches.org/etiquette.htm>www.re-wrenches.org/etiquette.htm

Check out participant bios:
<http://www.members.re-wrenches.org>www.members.re-wrenches.org


_______________________________________________
List sponsored by Home Power magazine

List Address: <mailto:RE-wrenches@lists.re-wrenches.org>RE-wrenches@lists.re-wrenches.org

Options & settings:
<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
<http://www.re-wrenches.org/etiquette.htm>www.re-wrenches.org/etiquette.htm

Check out participant bios:
<http://www.members.re-wrenches.org>www.members.re-wrenches.org




--
Chris Mason
President, Comet Systems Ltd
<http://www.cometenergysystems.com>www.cometenergysystems.com
Cell: 264.235.5670
Skype: netconcepts

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to