Hi Folks, I have an old Xantrex TM500 energy meter that I'm repurposing for a personal PV project. The unit was originally set up with the TM48 48v adapter/shunt board (This thing has an RJ-11 connector for the comm cable to the TM500 and screws directly to the kelvin terminals on a 500A shunt). The 48V shunt board went bad, which is why I ended up with the TM500 unit, but that's ok because I need it to work with a 24V system now. The low-voltage shunt board for 12 and 24V systems was smaller and simpler (as far as I can tell), but I haven't been able to find one anywhere. Anyone out there have an old low-voltage shunt board that you want to sell? If so please contact me off-list. Thanks.
Luke Christy NABCEP Certified PV Installer™: Certification #031409-25 NABCEP Certified Solar Heating Installer™: Certification #ST032611-03 CoSEIA Certified PV Installer Solar Gain Services, LLC Monte Vista, CO sgsrenewab...@gmail.com 719.588.3044 www.sgsrenewables.com _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
