Dave, does Soladeck have a smaller basic junction box without the combiner box fittings?
Bill Dorsett Manhattan, KS -----Original Message----- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Dave Palumbo Sent: Sunday, November 25, 2012 8:20 AM To: 'RE-wrenches' Subject: Re: [RE-wrenches] Best practices for conduit penetration on roof Rich, We have been using SolaDeck PV roof mount enclosure. NEMA 3R with a flashed penetration. Can use for combining, or simply as a pass through box. Dave David Palumbo Independent Power LLC 462 Solar Way Drive Hyde Park, VT 05655 www.independentpowerllc.com NABCEP Certified PV Installer Vermont Solar Partner 25 Years Experience, (802) 888-7194 -----Original Message----- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Rich Nicol Sent: Sunday, November 25, 2012 8:11 AM To: 'RE-wrenches' Subject: [RE-wrenches] Best practices for conduit penetration on roof Wrenches, We typically run conduit for roof mounts over the edge of the roof to the eaves, rather than penetrate the roof whenever possible. An upcoming installation on an freshly asphalt shingled roof requires that we penetrate the roof for the conduit run (Enphase). I'm wondering if there are any suggestions for preferred flashing products and best known practices. It's always seemed to me that the typical Oatey type flashing dries and cracks eventually. Thanks for your insights.. Rich _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
