Jason, Why don't you transition to romex in the Soladeck, eliminating the need for a junction box in the attic?
I abide by the CE Code (Canadian) and run a #6green from the roof to the dist pnl. benn Sent from a 'smart' phone, with touch screen keys. Please excuse shortcuts and typos. On 2012-10-25, at 7:12 AM, Jason Szumlanski <ja...@fafcosolar.com> wrote: > I'm sure this has been covered, but I could not find it in the archives. > > We are considering using Romex in the attic for the first time. My plan was > to use the new Enphase coupler to connect the trunk cable to Type TC-ER, > enter a Soladeck passthrough box on the roof into a junction box in the attic > where I would make the transition to 10/3 Romex. I'm hung up on the GEC going > back to the service panel. Any suggestions? > > By the way, we are on NEC 2008, and in most cases there is also a requirement > for an additional grounding electrode per NEC 690.47(D) (that shouldn't > really relate to my issue). > > Jason Szumlanski > Fafco Solar > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
