There is a similar balasted rack from a company
called
Ecolibrium.
http://www.triplepundit.com/2012/07/ecolibrium-solar-cutting-edge-simplicity-pv-solar-installation/.
The fly in the ointment is that if the roof is
not totally flat, the modules flex along the rows
to make up the difference. The company
representative seems to think that this is just fine. What do you think?
At 03:36 PM 8/31/2012, you wrote:
Ryan
I do not think that they have a 30 degree
option, but I have been pretty impressed with
<http://dynoraxx.com/>Dynoraxx tool-less
approach and using fiberglass non-conductive
material ( read no grounding of racking). Now
all we need is a fiberglass non-conducting module frame!
Bill Hoffer
On Fri, Aug 31, 2012 at 12:17 PM, Dana Brandt
<<mailto:d...@ecotechenergy.com>d...@ecotechenergy.com> wrote:
We just did a system on 10 degree AET and liked
it. I think they have a 30 degree option. I'd be
worried about inter-row shading, though.
The DPW POWER-FAB BRM has more flexibility with
row spacing, but I found it to be pretty expensive.
Dana
Dana Brandt
Ecotech Energy Systems, LLC
<http://www.ecotechenergy.com>www.ecotechenergy.com
<mailto:d...@ecotechenergy.com>d...@ecotechenergy.com
<tel:360.318.7646>360.318.7646
On Tue, Aug 28, 2012 at 1:56 PM, Glenn Burt
<<mailto:glenn.b...@glbcc.com>glenn.b...@glbcc.com> wrote:
Hi Ryan,
We have used the AET Rayport stainless steel
ballasted racking system on dozens of
installations and have been quite satisfied with
the light ballast required (all open racking),
integral module grounding, lightweight of
materials (pressed stainless steel) and quickness of assembly.
<http://aetenergy.com/products/RAYPORT-B-solar-mount-solution>http://aetenergy.com/products/RAYPORT-B-solar-mount-solution
Glenn Burt
glb, Consulting Company
From:
<mailto:re-wrenches-boun...@lists.re-wrenches.org>re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Ryan Harkins
Sent: Tuesday, August 28, 2012 2:32 PM
To: RE-wrenches
Subject: [RE-wrenches] Ballasted Roof Racking Recommendations?
Anyone have recommendations for a ballasted roof
racking manufacturer? Tilts of 30-degrees or more would be best.
Ryan Harkins
NABCEP Certified Solar PV Installer /
Project Manager
_______________________________________________
List sponsored by Home Power magazine
List Address:
<mailto:RE-wrenches@lists.re-wrenches.org>RE-wrenches@lists.re-wrenches.org
Options & settings:
<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
<http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
<http://www.re-wrenches.org/etiquette.htm>www.re-wrenches.org/etiquette.htm
Check out participant bios:
<http://www.members.re-wrenches.org>www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address:
<mailto:RE-wrenches@lists.re-wrenches.org>RE-wrenches@lists.re-wrenches.org
Options & settings:
<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
<http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
<http://www.re-wrenches.org/etiquette.htm>www.re-wrenches.org/etiquette.htm
Check out participant bios:
<http://www.members.re-wrenches.org>www.members.re-wrenches.org
--
Bill Hoffer PE
NABCEP Certified Solar PV Installer™
Sunergy Engineering Services PLLC
2504 Columbia Ave NW
East Wenatchee WA 98802-3941
<mailto:suneng...@gmail.com>suneng...@gmail.com Cell:(509)679-6165
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
