Hi Folks,
These pumps are still in production. Check out FLUXINOS in Italy i...@fluxinos.it Parts available. Carl Emerson Free Power Co. Land line +64 9 473 4286 Mobile +64 22 630 9689 Email emer...@freepower.co.nz Web www.freepower.co.nz _____ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Brian Teitelbaum Sent: 16 August 2012 11:33 a.m. To: al...@positiveenergysolar.com; RE-wrenches Subject: Re: [RE-wrenches] Dankoff 48Vdc replacement brushes? Just to add to Allan's wonderfully informative post, if you can find a set of carbon-graphite brushes for any electric motor that is larger in width and depth (and a proper length) than the ones that you are trying to replace, you can easily resize them with a sheet of Emory cloth laying on a flat surface (like a sheet of glass) to make them fit the brush holders in the pump motor. Just make sure that you take off enough material so that the new brush slides easily in and out of the brush holder. You can get motor brushes in various sizes from any electric motor repair shop, or even at auto parts stores. I used to do that all the time when I was still repairing motors and generators back in the 80's. But as Allan said, it's probably not worth fixing. If it has run through a set of brushes, it probably has quite a few running hours on it. Who knows what will wear out next. Better to replace it with a new helical-rotor pump, like the Grundfos SQFlex, the Mono pumps, or one from Lorentz Brian Teitelbaum AEE Solar From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Allan Sindelar Sent: Wednesday, August 15, 2012 3:46 PM To: RE-wrenches Subject: Re: [RE-wrenches] Dankoff 48Vdc replacement brushes? Long gone. Years ago, the Italian manufacturer made some products that weren't up to standard, or some such. Cost Dankoff a lot of money to support warranties. Dankoff sued the manufacturer in international court and won, but never collected anything. That was the end of that relationship, of course. Usually the ovoid or the flexible gasket goes before the brushes, and they're made out of unobtanium. For awhile, Gary Hegg at Total Light & Power (505) 772-5759 PO Box 646 Pie Town, NM tried to service them. I think he eventually gave up, but he might have brushes. I think I know of one that I installed that's still working after 15 years. Of course, the property was vacant for 14 of those years. Tip: it's not worth fixing. Windy doesn't follow this list any more. Hope this helps! Allan Allan Sindelar <mailto:al...@positiveenergysolar.com> al...@positiveenergysolar.com NABCEP Certified Photovoltaic Installer NABCEP Certified Technical Sales Professional New Mexico EE98J Journeyman Electrician Founder and Chief Technology Officer Positive Energy, Inc. 3209 Richards Lane (note new address) Santa Fe, New Mexico 87507 505 424-1112 www.positiveenergysolar.com <http://www.positiveenergysolar.com/> On 8/15/2012 4:15 PM, SunHarvest wrote: Customer in need of replacement brushes for a Dankoff SunRise submersible 5226 48Vdc pump. Part number for brushes is BSH-5000. I keep getting the, "Sorry, they don't make those anymore" response from my suppliers. Anyone have them? Windy? Thanks! Eric Stikes SunHarvest Solar A Sustainable Energy Group Partner +1 (530) 798 - 3738 www.harvesthesun.com _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
