The SnapNRack ground mount rail system has end caps, we just installed them on a project and they look great.
On Mon, Aug 13, 2012 at 9:24 AM, Mark Richardson < mrichard...@newyorklightenergy.com> wrote: > We had to find end caps for a ground mount that was used as part of an > environmental learning center.**** > > I was able to get vinyl end caps that worked online from caplugs ( > http://www.caplugs.com/).**** > > A little silicone to seal the deal…**** > > ** ** > > [image: Description: Description: Description: NYLElogo]**** > > *Mark Richardson* > > mrichard...@newyorklightenergy.com**** > > ** ** > > *From:* re-wrenches-boun...@lists.re-wrenches.org [mailto: > re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of * > hol...@sbcglobal.net > *Sent:* Saturday, August 11, 2012 10:05 AM > *To:* RE-wrenches > > *Subject:* Re: [RE-wrenches] Unirac SolarMount rail caps**** > > ** ** > > just throwing this out....aluminum angle attached to ends - run between > rail ends (each pair)? aluminum flat bar? closes ends and gives a trimmed > look? Maybe use 24 or 22ga stainless than can be bent to form an angle? ask > client to cover material cost as that is "custom" work beyond typical scope > of build. **** > > Holt E. Kelly > Holtek Fireplace & Solar Products > 500 Jewell Dr. > Waco TX. 76712 > 254-751-9111 > www.holteksolar.com**** > > ----- Original Message ----- **** > > *From:* Maverick Brown [Maverick Solar] <maver...@mavericksolar.com> **** > > *To:* 'RE-wrenches' <re-wrenches@lists.re-wrenches.org> **** > > *Sent:* Friday, August 10, 2012 6:56 PM**** > > *Subject:* Re: [RE-wrenches] Unirac SolarMount rail caps**** > > ** ** > > For the Bee’s sake, just pump some grey silicone caulk into the ends and > scrape flat. ??**** > > ** ** > > *From:* re-wrenches-boun...@lists.re-wrenches.org > [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of *Dana > Brandt > *Sent:* Friday, August 10, 2012 3:12 PM > *To:* RE-wrenches > *Subject:* [RE-wrenches] Unirac SolarMount rail caps**** > > ** ** > > We just finished installing a system on SolarMount and the client is > unhappy with how the ends of the SolarMount rail look. She says it looks > unfinished and is concerned about bees nesting in them. I know there are > other rail products with more finished looking ends but this system is > already fully installed. Unirac has endcaps for the SunFrame, but those > aren't compatible with SolarMount. Anyone run into this before? Thoughts on > solutions? > > Thanks, > > Dana > > Dana Brandt > Ecotech Energy Systems, LLC > www.ecotechenergy.com > d...@ecotechenergy.com > 360.318.7646**** > ------------------------------ > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org**** > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > -- Chris Mason President, Comet Systems Ltd www.cometenergysystems.com Cell: 264.235.5670 Skype: netconcepts
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
