On 6/30/2012 11:50 PM, David Katz wrote:
The SW requires and inductor to operate in current mode for grid tie.
Maybe someone remembers the part number. It may be hard to find.
David Katz
The GTI ???
boB
Sent from my HTC smartphone on the Now Network from Sprint!
----- Reply message -----
From: "Bob Clark" <bcl...@solar-wind.us>
To: "re-wrenches@lists.re-wrenches.org"
<re-wrenches@lists.re-wrenches.org>
Subject: [RE-wrenches] Trace SW4024, 1998 vintage - Still OK for grid-tie?
Date: Sat, Jun 30, 2012 5:10 pm
RE-Wrenches:
Have a potential customer who wants to connect to the grid after many
years of off-grid living. He is asking if his older Trace inverter
(SW4024 inverter; Date of manufacture: 3rd quarter of 1998; S/N:
W07878; 120 volts and 33.3 Amps) would still be OK to use in a
grid-tie system.
What say you? Does it still comply with the latest standards for
grid-tie inverters? Should he start over with a new inverter?
*Bob Clark*
*/SolarWind Energy Systems, LLC/*
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
