We recently started stocking the Magnum Energy inverters and when we had a few installations requiring some adjustments to the default settings we were advised to order the Magnum Energy Remote Control. However, we then found out that this is a stripped down control and we needed to order the "Advanced" version of this control.
Our plan was to keep this in the assembly area and use anytime we have a Magnum inverter that needs modification of the setpoints. However, after ordering all these different models and controls it appears some or all of these setpoints in the inverter go back to default if we un-plug the remote control. Is this correct?? We have many projects that either the client does not want the remote control, will not pay the extra cost for the remote control, or we do not want them attempting to change these settings. Is there a way to use the remote to make these changes and then ship out the inverter with the modifications without the needing to include the remote control. Thanks, Jeff Yago
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
