i did a top of pole mount with these modules. the traditional pole mount hardware was replaced with dpw power rails. i know this is a solid mount but somehow nuts and bolts through a rear flange feels stronger. the biggest issue was there is no place to mount the wire routing clips. this proved somewhat problematic. i would not use these modules again because of that. todd On Friday, May 4, 2012 6:01pm, "Dave Palumbo" <d...@independentpowerllc.com> said:
All, We are considering using Solar World 2.0 framed modules. Not having put hands on these yet, we are looking for testimonials and opinions on these “top mount only” modules. And while we’re at, it what about Solar World’s 2.5’s with the bottom mount flange? David Palumbo Independent Power LLC 462 Solar Way Drive Hyde Park, VT 05655 www.independentpowerllc.com NABCEP Certified PV Installer Vermont Solar Partner 24 Years Experience, (802) 888-7194 Sent from Finest Planet WebMail.
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
