the good old 4024 don't have any difference in the acceptance window from AC-1 or 2 Only issue is if you want genny support or AGS.
jay peltz power On Apr 16, 2012, at 7:54 AM, frenergy wrote: > Wrenches, > > I had not thought of using AC1 for the genny....I had some thinking > in the back of my mind that AC1 had to meet tighter input requirements to be > practical for a generator and was thus delegated to grid use, which is not > used here.. I'll keep that one in my toolbox. Customer manually starts the > generator so AC1 is an option. > > Yes, it is a deep well (250') and the pump is manually turned on to > occasionally fill a 2500 Gallon tank for gravity feed. This the only time > the autoformer is in the picture. > > Part of the reason I was considering the Magnum was for the 240/120 > feature, though this particular install has some equipment space requirements > that could make it a major job to install Magnum's vertical footprint vs. > that of the SW. > > I just called DPW (Alan's suggestion) and they are in fact still > repairing SW's. Raymond there says turnaround is usually 1-2 days...he also > said AC1 for the gen would be an option, though be sure to never use the > "sell" mode. I found Tekris through a search, but did not contact them. > It's good to see there are also other options to repair these inverters > (thanks Mac). > > Phil, I'm also thinking it may be that extra "kick" of something like > the conventional frig (with the other loads running, batts charging, pump > running) in the house that produces the out-of-spec condition, bumping the > inverter out of the picture. It's wait and see right now with my new batt > charge and AC2 > amps settings and how they affect the SW staying online. So far so good. > I'll have to look into the picoscope. > > Thanks again to all for so much help. This list rocks. > > Bill > Feather River Solar Electric > 4291 Nelson St. > Taylorsville, CA 95983 > 530-284-7849/6544 fax > solar powered since 1982 > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
