Polaris has the enitre grey fine stranded line of connectors. Not sure if Burndy has connectors that are rated for fine stranded if that is what you are using. Mark Frye Berkeley Solar Electric Systems 303 Redbud Way Nevada City, CA 95959 (530) 401-8024 www.berkeleysolar.com
-----Original Message----- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of penobscotso...@midmaine.com Sent: Tuesday, January 17, 2012 11:09 AM To: RE-wrenches Subject: Re: [RE-wrenches] battery buss bars Here's one of the 6 port Burndy blocks for up to 600 kcmil, with spec sheet: http://www.burndy.com/site-search.aspx?cx=002899303449139187703%3Ae9jb50hrnu c&cof=FORID%3A10&ie=UTF-8&q=insulated+blocks&SearchType=PartNumber&go.x=0&go .y=0 > I've also used the big Polaris insulated tap connectors. I used one > that has 6 ports that are max. 250 MCM, I believe. I don't know the > amp rating, but I would assume it would match the largest conductor. > > R. Walters > r...@solarray.com > Solar Engineer _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
