Mac, Try Paul Mattaliano , paul.mattali...@exide.com. When I asked him about using two parallel strings of that same 100A33 battery configuration at 48V, he told me this: "C100 rating of 100G33 is 2100 so 2 parallel strings is 4200. 5%=210A. Since their 300A charging current exceeds 5%, recommend 2.35 VPC bulk/absorb and 2.25 VPC float with monthly equalization charges. Depending on system performance/operating parameters, these values may have to be tweaked."
If you can't get Paul, try Erica or Paula; neither are in tech support but could direct you. Erica Binnewies**** *GNB** **I**NDUSTRIAL** P**OWER***** (510) 843-9433**** (510) 843-9434 Fax**** erica.binnew...@exide.com or Paula Robison Exide Technologies - Industrial Energy**** (V) 510-581-6464**** (F) 510-247-1165 On Thu, Sep 29, 2011 at 8:04 PM, mac Lewis <maclew...@gmail.com> wrote: > Hello wrenches, > > Does anyone have a good technical contact at GNB? Specifically, I am > looking for good charging setpoints for the Absolyte IIP Type 100A33. > Oddly, on all the spec sheets I've found they call this a 6V battery, > however these are 2V batteries. > > Thanks > > -- > > > > Mac Lewis > > * > > "Yo solo sé que no sé nada." -Sócrates > * > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
