Hi Wrenches -
Does anyone know what the specific working clearance requirements are for disconnects switches (there might be a difference between fused and non-fused) and meter sockets? I've historically gone by the typical conservative approach found in NEC 110.26, ie 3' in front and 30" wide for typical applications. However, it is often tempting to try to stretch these rules for standard utility required disconnects or meter sockets. For example we might have a utility disconnect over a flower bed that technically doesn't allow for a full 3' in front or maybe the switch needs to be mounted above a sloped driveway. Any opinions and interpretations would be appreciated. Thanks, August August Goers Luminalt Energy Corporation 1320 Potrero Avenue San Francisco, CA 94110 m: 415.559.1525 o: 415.641.4000 aug...@luminalt.com
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
