Ditto Bill's comments! I have had a PVA600 for about 8 months and am
very pleased with its capabilities.
Regards,
Gary Willett, PE
g...@icarussolarservices.com <mailto:g...@icarussolarservices.com>
On 7/29/2011 3:41 PM, Bill Brooks wrote:
Keith,
As I board a flight from Maui to Oahu this evening, this curve tracer
rocks. It is truly what I have been wait for over a decade. Everyone
should buy one and I don't even get royalties for saying that.
Bill.
*From:*re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] *On Behalf Of
*Keith Cronin
*Sent:* Friday, July 29, 2011 10:57 AM
*To:* RE-Wrenches
*Subject:* [RE-wrenches] Solmetric PVA-600
Any wrenches using this tool?
If so, feedback?
http://www.solmetric.com/pva600.html
Bill- what is your take on its IV Curve measurement data?
Perhaps its been a while, but I recall your tested was in the $20k
cost zone?
This seems like a reasonable tool to have and all of the benefits of
commissioning plus being able to quickly identify challenges.
It also seems to provide a glimpse into the future of mod manu's
products and their efficacy over time.
Aloha,
Keith
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options& settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules& etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
