We recently bought a couple of fixed value torque drivers for a Sunpower T-10 job. They were reasonably priced, set to a value we needed and end in a ¼ driver tip (can be adapted to any bit).
http://www.flexibleassembly.com/Products/CDI-Product-Index/1501TP-1 -Glenn Burt From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jason Szumlanski Sent: Friday, July 08, 2011 9:02 AM To: RE-wrenches Subject: [RE-wrenches] Torque Wrenches Im looking for a recommendation on a good torque wrench for installing S-5 clamps. I saw the past posts on torque screwdrivers, but Im looking for a wrench calibrated to the 100-150 in-lbs range. Jason Szumlanski Fafco Solar
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
