The company that offers an innovative wire management solution for their
modules will have their stock go up. (Hint Hint Solarworld).
A few years ago we could run conduit module to module, looked great but
that would be unreasonable on a large system today. However the "just
let the wires fly, and the installer can figure out" design may be the
current standard, but its not even close to being optimized.
Its unbelievable all these bright engineers on the manufacturing side
can't come up with something better.
Ray Walters
On 6/24/2011 7:47 PM, William Miller wrote:
Unfortunately for all of us the PV industry has put little thought
into proper wire management. Standard appliances (such as air
conditioning units) all accommodate standard trade size wiring
hardware (conduit and fittings). This is not the case with PV wiring.
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
