Thanks for the feedback guys.
Yeah, i suppose that in a single string, cable length is not as important as it
would be for the paralleling cables.
Ray, good point that if there are multiple parallel strings, then the series
jumpers in one string should be equal length to the series jumpers in each
string. I see the logic in that.
Daryle, 'right-angle lugs', i've seen those. Good suggestion for difficult
connections, thanks. I'll have to keep a few of those handy for future jobs.
Bob, are you saying that you weld the interconnect cables to the battery posts?
and/or use 'plates' to bolt the posts together? I've seen plates used, but
welding the lugs to the posts ....? ... see next thread.... 'Battery Post
Galling'
benn
DayStar Renewable Energy Inc. benn@daystarsolar.ca780-906-7807 HAVE A SUNNY DAY
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
