Folks, I have an Enphase D380 micro inverter sitting on my workbench (such as it is).
With my ohm meter I can detect continuity between the chasis and the AC equipment ground pin, between the chasis and the DC- pin, and between the AC equipment ground pin and DC- pin. My assumption is that each of these three is electrically identical and solidly connected inside the inverter. But, I don't know. The folks at Enphase tech support will not tell me whether or not this is true. Anyone out there have any ideas about this? Mark Frye Berkeley Solar Electric Systems 303 Redbud Way Nevada City, CA 95959 (530) 401-8024 www.berkeleysolar.com
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
