I don't know, Mark, but it seems to me that it might be an issue.

If you have two buildings, each with their own service, and connected to a 
single T-former on a pole, I would think that you would create a ground loop if 
you connected the grounds on the two services together. They would be connected 
together at the T-former (through the common neutral), and also at the 
grounding electrodes, creating a loop.

Since the neutrals are pulled from the T-formers, I would think that if you had 
two separate transformers, the neutrals, and hence the grounds, would be 
isolated from each other, and this wouldn't be a problem.

I'm I off-base here? What think you, esteemed wrenches?

Brian Teitelbaum
AEE Solar



From: re-wrenches-boun...@lists.re-wrenches.org 
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Mark Frye
Sent: Monday, April 18, 2011 1:09 PM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] Two Buildings, Two Services, One Roof

I have not yet visited the site to see, but I would guess that they are feed 
from the same transformer.

If they were, how would that make it OK?

Mark Frye
Berkeley Solar Electric Systems
303 Redbud Way
Nevada City,  CA 95959
(530) 401-8024
www.berkeleysolar.com<http://www.berkeleysolar.com/>


________________________________
From: re-wrenches-boun...@lists.re-wrenches.org 
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Brian Teitelbaum
Sent: Monday, April 18, 2011 12:54 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Two Buildings, Two Services, One Roof
Mark,

Are both buildings being fed from the same utility transformer?

I thank that may be a key question here

Brian Teitelbaum
AEE Solar
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to