Jim:
Direct power makes a "bent" tall foot. This item is made from flat
aluminum stock that has been bent. I have avoided them because an extruded
foot seems stronger than one made from bent metal. This item may work for
you, however.
See page 8 of this
catalog: http://www.dpwsolar.com/pdf/lit/SL-ML-1034-2P_DPWPwerRailCat.pdf
William Miller
At 11:24 AM 4/14/2011, you wrote:
Wrenches
after a brief search of roof-mount www sites I was not able to find a
taller aluminum L-foot than the standard 3 inch tall style. I recall that
Unirac makes a double wide one but about 2 inches taller would do the trick.
Thanks as always
Jim Duncan
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
