Interesting that it seems the industry is moving back to L-feet and sealant? Always worked for many situations.
R. Walters r...@solarray.com Solar Engineer On Apr 7, 2011, at 7:11 PM, Andrew Truitt wrote: > > Here's the VersaBracket option from S-5!: > > http://www.s-5.com/clamps/index_71.cfm > > > For a brighter energy future, > > Andrew Truitt > Principal > Truitt Renewable Energy Consulting > NABCEP Certified PV Installer™ (ID# 032407-66) > (202) 486-7507 > http://www.linkedin.com/pub/andrew-truitt/8/622/713 > > <24 copy.jpg> > > "Don't get me wrong: I love nuclear energy! It's just that I prefer fusion to > fission. And it just so happens that there's an enormous fusion reactor > safely banked a few million miles from us. It delivers more than we could > ever use in just about 8 minutes. And it's wireless!" > > ~William McDonough > > > > > > On Thu, Apr 7, 2011 at 5:53 PM, jay peltz <j...@asis.com> wrote: > Hi Daryl, > > I have drilled a small pilot hole, put plenty of sealant around it, then lag > through it with what ever foot you are using. > > I don't think the cost of flashing around each foot with a rubber boot and 15 > screws is any better but its sure more costly in time and money. > > jay peltz power > > > On Apr 7, 2011, at 2:28 PM, penobscotso...@midmaine.com wrote: > > > Does anyone have experience mounting arrays on barns with 24" wide > > galvanized roofing (not standing seam)? It is flat, not corrugated, but > > has an overlapping edge on either side. It's pretty much a standard on > > barn roofs around here, but I hesitate to penetrate any metal roof. How > > have others dealt with this type of material? > > > > Thanks for any information, > > Daryl > > > > Daryl DeJoy > > NABCEP Certified PV installer > > Penobscot Solar Design > > > > mbers.re-wrenches.org > > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
