Jay,
I probably could've purchased just the main breaker, but didn't take the
time, I needed it in a hurry, and the whole assembly was easily found.
Mike

On Sun, Apr 3, 2011 at 10:46 AM, jay peltz <j...@asis.com> wrote:

> Hi Mike,
>
> You were not able to buy just the breaker, you had to buy the whole load
> center or just the breaker/buss?
> thanks,
>
>
> jay
>
> peltz power
>
>  On Apr 3, 2011, at 10:07 AM, Mike Nelson wrote:
>
>  I have done this. I purchased a 225A all in one meter panel, and
> purchased an identical 200A meter panel, and changed out the 225A main for a
> 200. Now I have a useless 225A main breaker in my shop. But it worked well.
> Mike Nelson
> MD Electric & Solar, Inc.
> Gualala Ca.
>
> On Sun, Apr 3, 2011 at 10:04 AM, jay peltz <j...@asis.com> wrote:
>
>> I'm wondering if anyone has been able to configure a CH meter breaker (
>> their name for a
>> main service with meter and breakers) with a 200 amp main and 225 amp
>> buss.
>>
>> They make a 225 amp buss, but comes with a 225 amp main.
>>
>> Reason is to allow a 10kW system without a tap, and since its a remodel
>> good time for a upgrade from the Zinsco.
>>
>> thanks,
>>
>> jay
>>
>> peltz power
>>
>>
>>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
>
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches@lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to