Allan:
We have had problems if battery terminals are not absolutely clean and dry
when mating to connectors. We use a wire brush, usually chucked in a small
right-angle grinder. We apply no coating until connections are done and
tested. We then apply a spray product we purchase at Napa Auto. It drys
eventually to a non-sticky consistency.
William Miller
At 04:12 PM 2/22/2011, you wrote:
Wrenches,
Russ in our Taos office sent me the following query. I haven't seen this
problem before and told him so, but others among you may know more.
What problems if any have you had with Quick-Cote battery terminal
coating? What else works really well and lasts the life of the batteries?
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
