I see the FM60 had a 60 volt option. Why not just use a single one at that
battery setting for charging the battery bank?
Todd
On Thursday, February 10, 2011 9:44am, "Darryl Thayer" <daryl_so...@yahoo.com>
said:
Hi all
I have attached a PDF of a charging scheme using Outback FM controllers. The
upper voltage 36 to 72 volt CC can not have a communication line connected, it
will blow something, either the hub, or the controller as the controller floats
but the communication lines are connected to the negative, and it would be 36
volts above ground.
Sent from Finest Planet WebMail.
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
