Aaron:
I might be able to offer some insight I have developed with some previous
design evolutions, but you forgot to include an essential piece of
information: Curvature over N-S or E-W?
William
PS: Also, Off-grid or Grid-tie?
wm
At 11:18 AM 1/22/2011, you wrote:
It depends upon the curature of the roof. If the cure is great enough run
rails horizonal and mount portrate, if the curature is less and your
modules can mount on the short side, same plan mounting landscape. .
From: Aaron Mandelkorn <reoso...@gmail.com>
To: re-wrenches@lists.re-wrenches.org
Sent: Sat, January 22, 2011 10:40:46 AM
Subject: [RE-wrenches] Barrel Roof Mounting
Just wondering if anyone has any info about mounting systems designed for
barrel roofs. I have been looking into this for a little while and can't
seem to find any commercially available mounting solution to this roof
type. Has anyone else had any experience mounting to this roof type? My
first thought was to create some kind of raised flat structure to mount to
using unistrut and standoffs and maybe a top down mounting system on top
of it? Any ideas?
Aaron Mandelkorn
Renewable Energy Outfitters
P.O. Box 65
Salida CO 81201
(970)596-3744
<mailto:reoso...@gmail.com>reoso...@gmail.com
www.reosolar.com
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
