wow, that was from back in May of 2009. I bought mine about 6-8 months ago, a 337, that is in fact affected by this recall. You'd a thunk it would/should have been pulled off the shelf.can't say that i noticed any voltage discrepancies, but then again, its not like i always test a circuit with two meters..... i do notice that the current reading won't always zero out. just setting the dial to "A" (ac or dc) and it will fluctuate between 0.1A and 0.5A. anyone else notice this?
Very much appreciate the heads up Glenn. benn DayStar Renewable Energy Inc. benn@daystarsolar.ca780-906-7807 HAVE A SUNNY DAY From: glenn.b...@glbcc.com To: re-wrenches@lists.re-wrenches.org Date: Wed, 19 Jan 2011 11:57:44 -0500 Subject: [RE-wrenches] Fluke meter recall FYI recall on a few popular Fluke clamp-on DMMs: http://www.fluke.com/Fluke/usen/support/safety/33X-Recall.htm -Glenn Burt _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
