I've been through this one, to balance the third
leg of a 3 phase generator which has a pair of
stacked SW4024s on it. After a long search of
the available industrial chargers, we added
another SW4024. The system had certain heavy
surge loads, which we put on a special panel powered by the third inverter.
For the money, I think another inverter is the
best bet. Maybe Chinese imports may change the
situation, but if you want to stay away from
them, another inverter would likely still be your most economical choice.
At 06:13 PM 12/27/2010, you wrote:
Hello battery wrenches,
Drake
I am looking for recommendations for an
industrial grade battery charger for our shop.
Most of what I am finding is in India, China or
Germany but I would like something a little
closer to home. I am looking for these features:
* automatic 3 stage charging selectable for
6 or 12 volt AGM, flooded or GEL
* manual adjustable voltage control up to 20+ Vdc
* manual adjustable current limiter 1 to 50+ amps
* adjustable timer shut off
Thanks,
Larry Crutcher
General Manager
<http://www.starlightsolar.com>Starlight Solar Power Systems
11881 S Fortuna Road, #210
Yuma, AZ 85367
Phone
(928) 342-9103
powered by STARLIGHT™
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
