OK mystery solved. Stuff has changed since the 1990s. I wonder why
it's not called the SW MINUS then? Good old Xantrex.
thanks
Hugh
Hugh:
I apologize for disagreeing, but the SW PLUS does not have internal
relays (the PS does not either). It relies on an external AGS
module that has the relays.
William
At 12:06 AM 11/29/2010, you wrote:
Hi William,
If it's actually an SW and not a PS inverter then it already
contains small relays that do the gen start (or they use to back in
those days), and all you have/had to do is to add any larger slave
relays to make it work. I don't think this AGS unit gives you any
additional functions.
Hugh Piggott
Warren:
I can see a few:
1. It will not interface with the SW plus,
2. It will not take advantage of the charging intelligence or load
start functions in the SW plus.
3. It will work on a 48 volt system.
4. Analog settings are generally very approximate, especially
with such small trim-pots.
William Miller
At 09:28 PM 11/28/2010, you wrote:
Hugh Piggott
Scoraig
http://www.scoraigwind.co.uk
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
--
Hugh Piggott
Scoraig
http://www.scoraigwind.co.uk
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
