Hi Jeff, Its not the voltage but amps, the apollo is only 80amps, and the old MX's you can push to 70 so no real advantage there.
j On Oct 20, 2010, at 11:26 AM, Jeff Oldham wrote: > I think you run a very high risk of smoking the controllers. So rather than > waste the money, gear and potential fire I would suggest using either a > Apollo HV-80 (200Voc) or the brand new Schneider/Xantrex 600Voc controller - > the new holy grail of controllers! Then rewire the array accordingly. > > Good luck! > > -jeff o > > > From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative > SOLutions > > ____________________________________________________________ > Hate Carrying Pet Food? > Now you don't have to! Pet sites deliver to your door for free! > PetConsumers.com_______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
