I have the same question, only regarding pole mounts.
Todd
On Wednesday, October 20, 2010 8:06am, "benn kilburn" <b...@daystarsolar.ca>
said:
Mornin,
I'm looking at mounting an Enphase M190 system on a standing seam metal roof
and was considering using the S-5-PV clamps (as opposed to just the S-5's and
L-feet), which do not use any mounting rails. No rails means no where to
properly mount the M190's!?!
It was suggested to mount the M190's to each module frame using a fashioned
L-bracket, makes sense, but this would require drilling holes in the module
frame, and wouldn't that void the module warranty?
Also, am i the only one who is wondering if hanging a 4.4 pound inverter off of
the module frame will potentially cause some sagging/deformation of the frame
over the life of the system? Is this how those "andalay" modules support their
inverters?
thanks,
benn
DayStar Renewable Energy Inc.
b...@daystarsolar.ca
780-906-7807
HAVE A SUNNY DAY
Sent from Finest Planet WebMail.
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
