I too 2nd what jay suggests. Fred Howe is Very helpful & the units I've worked w/ from T&H maximize the hydros output over a broad range of water. Fred is on the web in Canada. ------Original Message------ From: jay peltz Sender: re-wrenches-boun...@lists.re-wrenches.org To: RE-wrenches ReplyTo: RE-wrenches Subject: Re: [RE-wrenches] AC to AC syncrhonizer for hydro plant. Sent: Sep 2, 2010 4:47 PM
Hi Jeremy, They'll need a lot more than that. I suggest you contact Thompson and Howe, they make control systems for grid direct hydros. http://www.smallhydropower.com/thes.html You might also have to contact Canyon industries about the right motor and drive parts. http://www.canyonhydro.com/ jay peltz power _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org Sent via BlackBerry by AT&T _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
