Hello Wrenches,
Does anyone have any good ideas for mounting thermocouples or RTD's to the back of modules for cell temperature measurements? I've seen electrical tape used (obviously the results were terrible), thermally conductive epoxy from Omega Instruments ($$) used, some kind of foil tape (electrically questionable). Any recommendations? Bubble gum? Glenn Burt NABCEP Certified PV Installer NYSERDA Eligible Installer Technical Specialist Alteris_RGB.gif Alteris RenewablesT 120 Broadway Albany, NY 12204 Tel: (518) 512-5154 Cell: (518) 681-2274 Fax: (518) 514-1175 Web: <http://www.alterisinc.com> www.alterisinc.com
<<image002.png>>
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
